Sharp GP2Y0A02YK0F Analog Distance Sensor 20-150cm by Pololu at Wise Warthog. MPN: P1137. Hurry! Limited time offer. Offer valid only while supplies last. The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum
Product Description & Reviews
The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications. The distance is indicated by an analog voltage, making this sensor very easy to use.
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range of this version is approximately 20 cm to 150 cm (8″ to 60″).
The GP2Y0A02 uses a 3-pin JST PH connector that works with our 3-pin JST PH cables for Sharp distance sensors (not included); the top picture on the right shows a shorter-range Sharp analog distance sensor with one of these cables. These cables have 3-pin JST connectors on one end and are available with pre-crimped male pins, pre-crimped female pins, and with unterminated wires on the other end. It is also possible to solder three wires to the sensor where the connector pins are mounted (see the lower picture to the right). When looking at the back, the three connections from left to right are power, ground, and the output signal.
Features & Highlights
- Operating voltage: 4.5 V to 5.5 V
- Average current consumption: 33 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
- Distance measuring range: 20 cm to 150 cm (8″ to 60″)
- Output type: analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
|Item Weight:||0.01 pounds|
|Item Size:||0.85 x 0.75 x 0.75 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Pololu, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By TELEMECANIQUE SENSORS
'Photoelectric Sensor, Shape Rectangular, Sensing Method Retroreflective, Operation Mode Light On, Power Requirement 24 to 240VAC/DC, Circuit Type Solid State Relay NC, Electrical Connection 2m Cable, Max. Sensing Distance 9m, Length 70.00mm, Max. Lo...
By Banner '47
mpn: SBR1, ean: 0662488176280,
This Banner SBR1 receiver has a LED status indicator and receives an infrared LED sensing beam with a 940 nm wavelength and a range of up to 150'. The opposed-mode sensor is powered by a 3- and 4-wire power block (not included) and has a 1 ms on/off ...
By Shine Gold Electronices
SG1133-V series are ceramic package photodiodes that offer low dark current. Ceramic package used is light-impervious, so no stray light can reach the active area from the side or backside. This allows reliable optical measurements in the visible ran...