Optical Cables, 8 Fiber Optic Terminal Box/Digital Video Terminals
Optical Cables, 8 Fiber Optic Terminal Box/Digital Video Terminals by Optical Adapter at Wise Warthog. MPN: HN. Hurry! Limited time offer. Offer valid only while supplies last. Please check the title and description about size and model.1) AlphaAmbient temperature: -25 - +40 Degrees Celsius2) Relative Humidity: ≤ 85% (+30
Product Description & Reviews
Please check the title and description about size and model.
1) AlphaAmbient temperature: -25 - +40 Degrees Celsius
2) Relative Humidity: ≤ 85% (+30 Degrees Celsius)
3) Atmospheric pressure: 70kPa - 106kPa
4) Insulation resistance: cable terminal and metal components and fiber optic cable metal to strengthen the core, the fiber optic cable between the metal components, fiber metal structures and between the insulation resistance should be greater than 2 × 104MΩ
5) Dielectric strength: between cable terminals and metal components and fiber metal reinforced core fiber optic cable between the metal components, fiber optic cable between the metal components and ground 15kV DC voltage, 1min without breakdown, arcing phenomena
1) can be used for the two-cable with fiber optic cable to strengthen the core holder, and fixed fiber optic cable jacket, Block has a protective earthing.
2) the set of fiber optic cable, connecting pigtail, pigtails, jumpers, asylum and other functions as one.
3) line redundancy long with a capacity plate asylum protection.
4) disk fiber plate for layering, you can easily increase or decrease in construction, operation convenience.
5) disk fiber plate were given to mark, easy to identify.
6) fiber pigtail, patch cord, import and export rubber protective sleeve to control the radius of curvature in the 3.75CM above.
7) the terminal box by screws, can be easily fixed on the wall or the user that the right place
Widely used in city, agricultural, then the network system, data, image transmission systems, CATV cable television series, for indoor fiber optic cable through access and branch continuation, played the role of the the pigtail disk storage and protection of joints, the use of cold-rolled steelelectrostatic spray made reasonable structure, beautiful big before the fiber optic cable to strengthen the core
Features & Highlights
- Please check the title and description about size and model.
- Non-slip metal grip connectors provide easy installation.
|Item Weight:||1.48 pounds|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Optical Adapter, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By BEI SENSORS
The HS35 combines the rugged, heavy-duty features usually associated with shafted encoders into a hollow shaft style. Its design includes dual bearings and shaft seals for NEMA 4, 13 and IP65 environmental ratings, a rugged metal housing, and a seale...
By Optical Adapter
mpn: HN, ean: 0827775744836,
Please check the title and description about size and model.1. The item is a OD 4.0 mm toslink male to toslink male audio fiber cable.2. Toslink Digital Audio Cable provides you the cleanest possible signal, even at extreme volume levels.3. Optical c...
By Optical Adapter
mpn: HN, ean: 0827775744669,
Please check the title and description about size and model.About the product1. Mainly used for switching various multi-channel headphone audio signal, which can be used for the same earphone or earplugs to compare different player / headphones2. 4 3...
By Hamlin / Littelfuse
mpn: 934-H-34, ean: 0653958692058,
Manufacturer:Littelfuse, Product Category:Sensor Hardware & Accessories, RoHS: Details, Product:Bar Magnets, For Use With:10 AT to 68 AT, Packaging:Bulk, Series:H-34, Brand:Hamlin / Littelfuse, Product Type:Sensor Hardware, F...
By Laurel Electronics
200-020 Remote Panel Mount DisplayRed LED 6 digit display, .56" tall characters. Nema 4x front panel, 1/8" DIN case. Includes DB9 to RJ12 serial port adapter. Specify 24 VDC or 110 VAC input. Serial RS232 input from laser. ...