Optex FA 2 meter coaxial transparent sensing photoelectric beam sensor PNP output M8 4 pin QD by Optex FA at Wise Warthog. MPN: ZR-QX200CP4. Hurry! Limited time offer. Offer valid only while supplies last. Polarized retro-reflective photoelectric beam sensor will detect the presence of all transparent targets. This includes glass, PET, and film. The
Product Description & Reviews
Polarized retro-reflective photoelectric beam sensor will detect the presence of all transparent targets. This includes glass, PET, and film. The bright Red LED light source features a unique coaxial lens design where the emitting beam and the receiving beam are on the same axis. This feature provides an extremely small beam and allows the sensor/reflector to be mounted behind mechanical structures requiring only a small opening to sense through. Maximum separation of the sensor to the P250F plastic corner cube reflector (51mm x 61mm) is 2 meters There is no minimum distance separation of the sensor and the reflector. This "No Dead Zone" feature provides many solutions where space is very limited. The beam spot size is 60mm at the max. 2 meter distance. The sensor will also also sense opaque targets and many translucent targets. Has a single turn sensitivity potentiometer and a two-position switch for selecting light-on or dark-on mode. Dual status indicators include a green LED for stability and an orange LED indicator for the output. Compact size (mm) is 31H x 20W and 11 thick. Enclosure protection is rated IP67. Price includes the sensor, reflector, and mounting bracket with screws. Hook up method uses a M8 4 pin QD connector. Molded cables are not included and must be ordered separately. (order M8-FS4-PVC type). The solid state PNP (sourcing) signal will switch 100mA with a 0.5ms response.
Features & Highlights
- 10 to 30VDC compact photoelectric beam sensor with bright red LED light source.
- Unique coaxial lens design for sensing all transparent targets using polarized retro-reflective sensing mode with long distance sensing up to 2 meters
- PNP open-collector output rated 100mA / 30VDC with .5ms response
0.43 x 1.22 x 0.79 inches
2.95 x 1.38 x 3.94 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Optex FA, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By TELEMECANIQUE SENSORS
'Photoelectric Sensor, Shape Rectangular, Sensing Method Through Beam, Operation Mode Selectable Light On/Dark On, Power Requirement 24 to 240VAC/DC, Circuit Type Relay NO/NC, Electrical Connection 2m Cable, Max. Sensing Distance 50m, Length 99.00mm...
mpn: QS30EQ, ean: 0662488730826,
This Banner QS30EQ emitter has an infrared LED sensing beam with an 875 nm wavelength and a range of up to 60 m. The opposed-mode sensor accepts 10-30 VDC input through its 5-pin Euro-style quick disconnect (QD) connector, and is intended for use wit...