Temperature Probes & Sensors - Page 5 - Extreame Savings! Save up to 45%

Extreame Savings! Up to 45% off on Temperature Probes & Sensors at Wise Warthog, Page 5. Top brands include System Sensor, Convectronics, Inc. Flameless Electric Air Heater, Fluke, MN Measurement Instruments LLC, MAXITROL, Temprel, Raytek, Gowoops, La Crosse Technology, Magnum Energy, Comark, ANALOG DEVICES, ZJIA, Walfront, diymore, GrillEye, LABFACILITY, DROK, & Oakton. Hurry! Limited time offers. Offers valid only while supplies last.

System Sensor 5600 135 Degree Fixed Temperature Rate-of-Rise, Single-Circuit Mechanical Heat Detector with Plain Housing
By System Sensor
In Stock
You Save: 3%

mpn: 5600, ean: 0783863027482,

4.4 out of 5 stars with 146 reviews
Multiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are available for low- and hightemperature ratings with either fixed temperature or combination fixed temperature/rate-of-rise (ROR) activation. The ROR element of the fixed/ROR models is restorable to accommodate field-testing. Installation flexibility. To satisfy a variety of installation needs, the 5600 series easily mounts to

Convectronics 001-10005T 240W 60V Open Quartz Flameless Electric Air Heater
By Convectronics, Inc. Flameless Electric Air Heater
In Stock

mpn: 001-10005T,

4.8 out of 5 stars with 53 reviews
Air Htr 15.0 ohms Open Tube, 60v-240w, 5.25'' Overall length, 0.41'' OD quartz & Inlet for 3/8'' OD tube. Similar to Sylvania 016501.Clean Electric Heat w/out the Flame. Temperatures up to 1500°F. Compact Size. Rapid Heat Up and Cool Down. Directable Heat.

Fluke 80PK-27 Sure Grip Industrial Surface Temperature Probe with a NIST-Traceable Calibration Certificate with Data
By Fluke
In Stock

mpn: 80PK-27CAL,

4.2 out of 5 stars with 144 reviews
The innovative suregrip design has a Soft rubber handle combined with a ergonomic shape is so comfortable to hold that you'll forget about the probe and focus on the measurement. All sure grip probes have an improved, more flexible strain Relief for a long life.Your unit is calibrated prior to shipment with a new nist-traceable calibration Certificate with data. The NIST calibration provides you assurance your instrument Meets manufacturer's specifications. Your instrument is ready to Use day

High Temperature k-type Thermocouple Sensor Ceramic Kiln Furnace with connector plate 2372F 1300C CR-02
By MN Measurement Instruments LLC
In Stock

mpn: CR-02, ean: 0096802971549,

4.2 out of 5 stars with 56 reviews
This is a heavy duty K-type Thermocouple for use in kiln and furnace applications. The probe is made from AWG 8 Gauge K-type thermocouple wire (chromel and alumel) and is rated for continuous use at very high temperatures up to 2372 °F Fahrenheit or 1300 °C Celsius. The k-type thermocouple is about 8.5 inch in total length, and the 6 insulation tubes are about 6.5 inch long. This type K Thermocouple Kiln Probe is made with 6 ceramic insulators, each about 1 inch long, and it allows you to

Temperature Sensor (Modified TS244, Use With TD244)
In Stock

mpn: NA, ean: 7437841555544,

4.8 out of 5 stars with 105 reviews
Temperature Sensor (Modified TS244, Use With TD244)Temperature Range (F):55°F to 90°F. Accessory For:Series 44 System.

Temprel AT21MU-12K-CI-Z Thermocouple Probe, Type K, Length 12", Ungrounded Junction, Molded On Mini-Plug Sheath: 0.125" & Inconel
By Temprel
In Stock

mpn: AT21MU-12K-CI-Z,

4.6 out of 5 stars with 131 reviews
Thermocouple Probe, Type K, Length 12'', Ungrounded Junction, Molded On Mini-PlugCalibration: K Type. Probe Size: 0.125'' (1/8'') OD x 12'' Length. Probe Material: Inconel®. Junction: Ungrounded. Connection: Molded on Mini-Plug.

10mA Fixed Mount Infrared Temperature Sensor, 0.46" @ 6" Distance, -4° to 932°F
By Raytek
In Stock

mpn: NA, ean: 7437843269258,

4.8 out of 5 stars with 88 reviews
Specification: Item: Fixed Mount Infrared Temperature SensorSensor Item: Fixed Mount Infrared Temperature SensorSensor Output Type: J ThermocoupleSensor Power Source: 24VDCSensor Spot Size and Distance: 0.46'' @ 6''Sensor Emissivity: 0.10 to 1.10Sensor Measurement Temp. Range: -4 Degrees to 932 Degrees FSensor Accuracy: +/-1.5%Sensor Cable Length: 10 ft.Sensor Current Rating: 10mAImpedance: 100 OhmsLoop Resistance: 50 K OhmsSpectral Response: 8 to 14uMAmbient Temp. Range: 32 Degrees To 160

Gowoops 5 PCS of Temperature Humidity Sensor Module Digital DHT11 for Arduino Raspberry Pi 2 3
By Gowoops
In Stock
You Save: 45%

mpn: EASM100600*5, ean: 0705586404838,

4.4 out of 5 stars with 36 reviews
Technical parameters: Supply voltage: 3.3 to 5.5VDC Output: single-bus digital signal Measuring range: Humidity 20% to 90% RH, Temperature 0 to 50 celsius degree Accuracy: Humidity +&-5% RH, temperature +&-2 celsius degree Resolution: Humidity 1% RH, temperature 1 celsius degree Long-term stability: less +&-1% RH per Year Notes: 1. To avoid the use of the condensation conditions 2. Long-term storage temperature 10 to 40 celsius degree, humidity below 60% 3. The use of power and ground

La Crosse Technology TX29U-IT 915 MHz Wireless Temperature Sensor
By La Crosse Technology
In Stock

mpn: TX29U-IT, ean: 0719534958960,

4.0 out of 5 stars with 103 reviews
The La Crosse Technology TX29U-IT 915 MHz Wireless Temperature Sensor is used in conjunction with La Crosse Technology wireless temperature stations that use the 915 MHz Instant Transmission wireless technology. In order to establish proper communication between the display and outdoor transmitter it is important that they be set up as follows: 1. Bring both units inside and have the units 3-5 feet apart with nothing in-between them. 2. Remove the batteries from both units. 3. Press one of

Raytek RAYCI1A10L Infrared Temperature Sensor with 3m Cable
By Raytek
In Stock

mpn: RAYCI1A10L, ean: 0095969312950,

4.7 out of 5 stars with 67 reviews
Output: Type J Thermocouple Temperature Range: 32 to 662 F (0 to 350 C) Optics: 4:1 (D:S) Response Time: 350 ms.

Magnum MEBTS15 Battery Temperature Sensor with 15' Cable
By Magnum Energy
In Stock
You Save: 16%

mpn: MEBTS15, ean: 0765053847049,

4.1 out of 5 stars with 43 reviews
NTP now stocks replacement parts for Magnum inverters. Replacement control boards are pre-tested, 15' battery temperature sensor monitors your battery and 20 AMP breakers.15' BATTERY TEMP SENSOR.

Comark Instruments | PT19L | Penetration Probe with 3" Stem
By Comark
In Stock
You Save: 18%

mpn: PT19L, ean: 0095969433907,

4.4 out of 5 stars with 46 reviews
The Comark Instruments PT19L type-T thermocouple probe measures temperature from -148 to +482 degrees F (-100 to +250 degrees C), and has 3'' stem and a 1.5mm tip for reduced impact on food products. The probe handle is attached to a coiled lead that stretches to extend reach. Its Lumberg locking connector attaches to a thermocouple kit or thermometer. It has a response time of 0.5 seconds for fast readings. This probe is designed for use in monitoring temperatures of food products.Type-T

Board Mount Temperature Sensors 2-Terminal IC Temp TRANSDUCER
In Stock

mpn: 584-AD590MF, ean: 0653958483335,

4.4 out of 5 stars with 57 reviews
Manufacturer:Analog Devices Inc.,Product Category:Board Mount Temperature Sensors,RoHS: Details,Output Type:Analog,Supply Voltage - Min:4 VDC,Supply Voltage - Max:30 VDC,Interface Type:-,Minimum Operating Temperature:- 55 C,Maximum Operating Temperature:+ 150 C,Mounting Style:SMD/SMT,Package / Case:FlatPack-2,Product:Temperature Transducer,Packaging:Bulk,Series:AD590,Brand:Analog Devices,Gain:+ 1 uA / K,Board Mount Temperature Sensors 2-Terminal IC Temp TRANSDUCER.

5pcs 3M K Type Mini-Connector Thermocouple Temperature Probe Sensor Measure Range -50~700°C
In Stock

mpn: 1, ean: 0702142602561,

4.1 out of 5 stars with 46 reviews
Features: Allows forming and bending of the thermocouple,no need to worry about the risk of cracking Can compatible with TM902C/TES1310 Meter to use Operating Temperature: -50-700°C Probe Material: metal Probe Diameter: 0.6mm /0.023 inch Probe Length: 8.33mm /0.328 inch Cable Length: 3 meter Cable Internal Insulation: Fiberglass Connector: K Type Mini-Connector Package includes: 5pcs 3 meter K Type Thermocouple cableK Type Thermocouple cable. Can compatible with TM902C/TES1310

EGT Thermocouple K type 1/8" NPT Temperature Probe Sensors Exhaust Gas Temp Probe with Exposed Tip & Connector,Stainless Steel
By Walfront
In Stock

mpn: Hilitand201, ean: 0663862307214,

4.0 out of 5 stars with 23 reviews
Specifications: Measuring range: 0-1250 ℃ Probe Material: Stainless Steel Probe Diameter: 5 mm/0.2inch Probe Length(Front): 80mm/3.2 inch Threads Size: 1/8'' NPT Threads Lock: Adjustable Pressure Lock(Adjustable Length) Cable Length: 1m Connector: Mini K Type Connector Weight: 70g Package Included: 1 x EGT K Type ThermocoupleExposed tip for fast response. Fits all our temperature controllers. Allows forming and bending of the thermocouple without the risk of cracking. The

Diymore 5Pcs DALLAS 18B20 DS18B20 TO-92 3 Pins Wire Digital Thermometer Temperature IC Sensor
By diymore
In Stock

mpn: TO,

4.9 out of 5 stars with 145 reviews
Requires No External Components. Software Compatible with the DS1822. Thermometer Resolution is User Selectable from 9 to 12 Bits. Unique 1-Wire Interface Requires Only One Port Pin for Communication. Each Device Has A Unique 64-Bit Serial Code Stored In An On-Board Rom. Specifications: Model: DS18B20 Accuracy: 0.5 Package: TO-92 Number of Pins: 3 Voltage Supply: 3V~5.5V Sensor Temperature: -55°C ~ +125°C Applications: Thermostatic Controls, Industrial Systems, Consumer Products,

GrillEye 0 Professional Meat Temperature Probe and Ambient Clip, Black (3- Pack)
By GrillEye
In Stock

mpn: AGE0002K1, ean: 0646791420445,

4.9 out of 5 stars with 77 reviews
The GrillEye Professional Meat Temperature Probe is specifically designed for precision temperature tracking with the GrillEye smart grilling device. It, also, includes the GrillEye probe clip that enables precision ambient temperature readings. Pro-Grade Withstands up to 380 degrees C - 716 degrees F Measures up to 300 degrees C - 572 degrees F Use with any Grill or Smoker Employing an extra long wire, GrillEye probe can be used even in grills with big housing. Food Safe The GrillEye probe

In Stock

mpn: FSTC-J-F,

4.4 out of 5 stars with 147 reviews
LABFACILITY FSTC-J-F SOCKET, STANDARD, T/C TYPE JPrice For: Pack of 50Order Unit: Spool of 100 For Use With:: J type Thermocouple SVHC:: No SVHC (17-Dec-2014).

DROK 5Pcs 10k B3950 Temperature Probe, -25°c to 125°c Temp Sensor, 3-Meter/9.8ft Sensitive Stainless Steel NTC Thermistor probe, Computer Temperature Sensor for Car
In Stock

mpn: 300458,

4.5 out of 5 stars with 22 reviews
Parameters: Type : NTC 10K/B3950 1% Measurement range : -25°c to 125°c (-13℉ to 257℉) Head Size : 5 x 25 mm / 0.2'' x 1'' (D*L) Connector: 2 Pin JST XH2.54mm Plug Resistance : 10K Ohm; Accuracy : 1%; Total Length : 3 meters (9.8ft) Applications: These can be used in temperature measurement and control of household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, dishwashers, washing machines and dryers. Package includes: 5x temperature

Oakton WD-35808-72 All-In-One pH/Temperature Probe, Double Junction and Epoxy Body
By Oakton
In Stock
You Save: 4%

mpn: WD-35808-72,

4.3 out of 5 stars with 140 reviews
Oakton WD-35808-72 All-In-One pH/Temperature Probe, Double Junction and Epoxy BodyAll-in-one pH electrode with a built-in temperature sensor for ease of use. Waterproof for durability. Double-junction to protect silver wire contamination, and to help prevent clogging.

Viewing Page 5 of 9

View more products in Sensors.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - wisewarthog.com. All Rights Reserved.