Pressure Probes & Sensors - Page 8 - Blowout Sale! Save up to 65%
Blowout Sale! Up to 65% off on Pressure Probes & Sensors at Wise Warthog, Page 8. Top brands include Square D by Schneider Electric, CGOLDENWALL, Telemecanique / Schneider Electric, INGERSOLL RAND COMPANY, Dwyer, TOOGOO, LGQing, Qisuw, LDCRE, Zerone, Stmicroelectronics, FridayParts, Danfoss, none-branded, Telemecanique, & Walfront. Hurry! Limited time offers. Offers valid only while supplies last.
RW-ST01A Load Cell Sensor Amplifier Transmitter Strain Gauge Amplifier Transducer Sensitivity 2.0mV/V±10% (Output Signal:0-5V)
In Stock
$109.00
You Save: 16%
4.3 out of 5 stars with 90 reviews
Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Product Description: Enclosure:ABS Net Weight:90g Applicable Sensitivity:1.0 or 2.0 mV/V±10% Input Signal:mV Output Signal:0-5V/10V&4-20mA Accuracy:0.3% Power Supply:DC24V Applicable Load Cell Excitation Voltage:5-12V Load Capacity:Parallel Connection of 350Ω Load cell 4 pcs at most Temperature Coefficient:Better than 100ppm Operating Temperature Range:0-50ºC Enclosure:IP65
XMLP050RD23F - Pressure Sensor, 50 psi, Analogue, 24 VDC, 1/4" - 18 NPT, 23 mA
By Telemecanique / Schneider Electric
In Stock
$119.25
mpn: XMLP050RD23F,
4.2 out of 5 stars with 13 reviews
XMLP050RD23F - Pressure Sensor, 50 psi, Analogue, 24 VDC, 1/4'' - 18 NPT, 23 mAPrice For: Each Operating Pressure Max: 50psi Sensor Output: Analogue Pressure Measurement Type: - Voltage Rating: 24VDC Port Style: 1/4'' - 18 NPT Supply Current: 23mA Product Range: XMLP Series.
Kit Press Switch 2340L5
By INGERSOLL RAND COMPANY
In Stock
$128.00
mpn: IR38471520, ean: 0642008678449,
4.6 out of 5 stars with 69 reviews
.
TOOGOO(R) 1kg small range weighing pressure sensor with HX711AD module load cell + HX711 module
In Stock
$2.90
mpn: 129064, ean: 4894621937908,
4.6 out of 5 stars with 24 reviews
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) 1kg small range weighing pressure sensor with HX711AD module load cell + HX711 modulecolor: greenMaterial:metalsize:80*12.7*12.7mmZero point output (mv / v) +/- 0.1Nonlinearity (% F.S) 0.05Input resistance (Ohm) 1000 +/- 50Repeatability (% F.S) 0.05Output resistance (Ohm) 1000 +/- 50Hysteresis (% F.S) 0.05Insulation
LGQing High Accuracy 10g-1kg Pressure Sensor Intelligent Flexible Thin Film Force Sensor RP-S5-ST
In Stock
$3.48
mpn: LGQing20190315, ean: 0742287854647,
4.8 out of 5 stars with 38 reviews
High Accuracy 10g-1kg Pressure Sensor Intelligent Flexible Thin Film Force Sensor RP-S5-STSpecifications:Model: RP-S5-STShape: FlexibleOutput signal: analogPressure induction range: 10g-1000gTrigger: 10 g, triggered, default Resistance 1MΩResponse time: < 10usOperating :Temperature -40℃~+85℃Life time :>1 millionEMI :Generates no EMIEDS: not ESD sensitiveDrift:The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc..
LGQing MPS20N0040D-D Sphygmomanometer Pressure Sensor 0-40kPa DIP-6 for Arduino Raspb
In Stock
$2.15
mpn: LGQing20190315, ean: 0742287854586,
4.8 out of 5 stars with 14 reviews
Specifications:- Measuring medium: air- Measuring range: 0-40kPa- Operating temperature range: -40 ℃ ~ + 125 ℃- Storage Temperature: -40 ℃ ~ + 150 ℃- Humidity: (50% ± 10%) RH- Ambient temperature: (25 ± 1) ℃- Medium temperature: (25 ± 1) ℃- Output impedance: 4kΩ ~ 6kΩ- Zero output: -15mV~+15mV- Hysteresis: +-0.7%F.S.- Power supply: ≤10V DC or ≤2.0mA DC- Insulation resistance: 100MΩ, 100VDCPackage Includes:1 x DIP Air Pressure SensorNote:Item color displayed in photos may
Qisuw DIP Air Pressure Sensor-MPS20N0040D-D Sphygmomanometer Pressure Sensor 0-40kPa DIP-6 For Arduino Raspb
In Stock
$3.22
ean: 0769620384999,
4.0 out of 5 stars with 37 reviews
MPS20N0040D-D Sphygmomanometer Pressure Sensor 0-40kPa DIP-6 For Arduino Specifications: - Measuring medium: air - Measuring range: 0-40kPa - Operating temperature range: -40 ℃ ~ + 125 ℃ - Storage Temperature: -40 ℃ ~ + 150 ℃ - Humidity: (50% ± 10%) RH - Ambient temperature: (25 ± 1) ℃ - Medium temperature: (25 ± 1) ℃ - Output impedance: 4kΩ ~ 6kΩ - Zero output: -15mV~+15mV - Hysteresis: +-0.7%F.S. - Power supply: ≤10V DC or ≤2.0mA DC - Insulation resistance: 100MΩ,
RP-C7.6-LT High Accuracy Intelligent Pressure-sensing Flexible Thin Film Pressure Sensor
In Stock
$2.59
mpn: Zeronev4c0u1pzwt, ean: 0792172555128,
4.2 out of 5 stars with 42 reviews
Specifications: Model: RP-C7.6-LT Manufacturing process: thin film Output signal: analog Pressure induction range: 20g-1.5kg Trigger: 20 g, default resistance 10MΩ Activation time:CHARACTERISTICS: The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc. LIGHTWEIGHT: Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate. STABILITY: This
Danfoss RT-5 Pressure Switch (Range: 4 Bar to 17 Bar) Pack of 2
In Stock
$300.00
mpn: IK-Danfoss RT-5,
4.7 out of 5 stars with 56 reviews
RT Pressure switches incorporate a pressure controlled, single-pole change over swich where the contact position depends on the pressure in the connection port and the set value. The RT series consists of pressure switches, differential pressure switches and pressure switches for neutral zone regulation, all for general use within the industrial and marine segments. The series also covers safety pressure switches dedicated for steam boiler plants. For installations in which operation is particul
Angle Sensor 4444902 9102385 9101533 for John Deere Excavator 490E 790ELC 992ELC Hitachi Excavator EX100-2 EX100-3 EX120-2 EX120-3 EX200-2 EX200-3 EX220-2 EX220-3
In Stock
$65.00
mpn: 4444902,9102385,9101533, ean: 0634665391090,
4.3 out of 5 stars with 41 reviews
Application :John Deere Excavator Models:490E 790ELC 992ELC Hitachi Excavator Models:EX100-2 EX100-3 EX120-2 EX120-3 EX200-2 EX200-3 EX220-2 EX220-3ZX450,ZX450H,ZX450H-HHEZX460LCH-AMS,ZX460LCH-HCMEZX470-5G,ZX470H-5G,ZX470LC-5G,ZX470LCH-5G,ZX470LCR-5G,ZX470R-5GZX480MT,ZX480MTHZX500LC,ZX500LCHZX600,ZX650HZX800,ZX850HNew aftermarket parts. Angle Sensor 4444902,9102385,9101533. Fits John Deere Excavator 490E 790ELC 992ELC Hitachi Excavator EX100-2 EX100-3 EX120-2 EX120-3 EX200-2 EX200-3 EX220-2 EX2
Square D 9012GDW5 Diaphragm-Actu Pressure Switch,3-150 psi
By Square D by Schneider Electric
In Stock
$189.95
You Save: 33%
mpn: 9012GDW5, ean: 0785901025016,
4.8 out of 5 stars with 52 reviews
This Square D 9012GDW5 single-stage diaphragm-actuated pressure switch for machine-tool applications has a 3-150 psi range on decreasing pressure and 6.0 psi +/-0.8 psi fixed differential for control circuit applications in pneumatic and hydraulic systems. The NEMA 4, 4X, and 13 enclosure has a zinc-plated steel diaphragm housing. The switch is Underwriters Laboratories (UL) Listed and Canadian Standards Organization (CSA) certified. It has a 1/4''-18 NPTF pressure connection. Square D pressure
Telemecanique XMLP100PD230 Pressure Sensor Transmitter, 0-100 psi Gauge Range, M12 Electrical Connection, 4-20 mA Analog Output, 1/4"-18" NPT Male Connection
In Stock
$116.64
You Save: 2%
mpn: XMLP100PD230, ean: 0785901717140,
4.8 out of 5 stars with 55 reviews
This Telemecanique XMLP100PD230 pressure transmitter with 0-100 psi range and 1/4''-18 NPT male fluid connection uses an M12 electrical connection to electronically measure and transmit pressure data as 4-20 MA analog output. The compact body is made of 316L stainless steel for corrosion resistance and has thin film technology to work with most fluids, including hydraulic oils, air, fresh water, and refrigeration fluids, as well as fluids and gases that are compatible with 316L stainless steel.
DYMH-103 Load Cell Miniature Weighing Sensor Pull Rod Pressure Tension Sensor Portable Crane Scale(0~100kg)
In Stock
$56.59
mpn: Walfrontrzgkc28bxn-06,
4.6 out of 5 stars with 34 reviews
Features: 1. Made of high quality stainless steel, strong resistance to mechanical fatigue, good hardenability. 2. Compact structure, high comprehensive precision, long-term stability. 3. Features high precision, high sensitivity, high stability, and durable in use. 4. Used in manufacturing processes such as injection molding and extrusion. 5. Widely used in automotive press assembly, automated assembly, 3C product testing, new energy product assembly, medical testing, robotics, mold assembly an