Motor Speed Controllers - Huge Savings! Save up to 11%


Huge Savings! Up to 11% off on Motor Speed Controllers at Wise Warthog. Top brands include Leeson Electric, KB Electronics, TIMESETL, Aweking, DZS Elec, TWTADE, Walmeck, LEEPRA, walfront, SkyTech, Saihisday, Allen-Bradley, & Dayton. Hurry! Limited time offers. Offers valid only while supplies last.



Leeson Electric, LM28204, 10HP, 1160RPM, 3PH, 230V;460V, 256TC Frame, C-Face Flange, Footless, Open, Traction Elevator Hoist Motor
By Leeson Electric
In Stock
$2,139.99
$2,118.13
You Save: 1%

mpn: LM28204,

4.3 out of 5 stars with 12 reviews
Leeson Electric, LM28204, 10HP, 1160RPM, 3PH, 230V;460V, 256TC Frame, C-Face Flange, Footless, Open, Traction Elevator Hoist MotorFast Shipping on Leeson Electric Motors. Authorized Leeson Electric Distributor.


KB Electronics, 9380, KBWM-120, 0-90VDC, .33 HP, Nema 1, DC Drive
By KB Electronics
In Stock
$93.80

mpn: KBWM-120,

4.8 out of 5 stars with 150 reviews
KB Electronics, 9380, KBWM-120, 0-90VDC, .33 HP, Nema 1, DC DriveAuthorized KB Electronics Distributor. Genuine Factory New Parts.


TIMESETL 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Electric Projects
By TIMESETL
In Stock
$13.99

mpn: TXJ-061-US, ean: 0611702529715,

4.7 out of 5 stars with 56 reviews
L298N of TIMESETL TIMESETL Motor Drive Controller - High Quality Specification: Size: 43*43*27mm/ 1.69*1.69*1.06 inch Dual H bridge drive (can drive 2 DC motors) Chip: L298N Logical voltage: 5V Drive voltage: 5V-35V Logic current: 0mA-36mA Drive current: 2A(For each DC motor) Weight: 30g TIMESETL L298N DC Stepper Motor Drive - Usage Great for Arduino, Smart Car, Power UNO, MEGA R3, Mega 2560, etc If driving voltage is more than 12V, please use external 5volt logic outputs to switch the


Aweking DC1.8-12V 1.8V 6V 9V 12V 2A Motor Speed Controller,PWM,Adjustable Driver,Max30W,No Switch Fuction Potentiometer,2A Self-healing Fuse Overloading Protection,Brush Motor
By Aweking
In Stock
$10.59

mpn: 43237-2, ean: 7523427762373,

4.8 out of 5 stars with 56 reviews
Working Voltage: DC1.8V-15V(Broad Voltage) MAX Current:2A Speed Rate Range:0%-100% PWM Freguency:21kHz Size:32mm*32mm*14mm Weight:18g Potentiometer: B100K;hole size 8mm 2A Fuse protects from reversely power supply connecting and overloading. Please use the reverse switch when you need reversing function. Attention! The power you apply on should not more than the rated current. Do note connect the positive and negative pole reversely. It may break the controller. You could switch motor pole to


KB Electronics Model KBSC-14FK Triac AC Motor Speed Control, Aluminum Encl. Rated 4.0 Amps @ 120 VAC with Radio Filter
By KB Electronics
In Stock
$24.61

mpn: H9045, ean: 0024822090452,

4.2 out of 5 stars with 18 reviews
The KBSC Series are Panel Mount, Fan Speed Controls which provide infinitely variable speed control of Shaded Pole, PSC, and AC/DC motors. These Solid State AC Variable Voltage Fan Controls operate from 115/230VAC, 50/60 Hz and include a rotary power On/Off switch, a high gain radio filter and minimum speed adjustment. The controls come in an aluminum enclosure with a threaded bushing and nut for panel mounting. This model also includes a face plate and dial.Fan speed control. For use with


Aweking DC10-30V 12V 24V 3A Motor Speed Controller,PWM,Adjustable Driver,Max80W,5%-95% Speed Controlling,With Switch potentiometer,Reversing Switch,LED Indicator,Brush Motor
By Aweking
In Stock
$12.59

mpn: d20170520xj0023, ean: 7523427762434,

4.0 out of 5 stars with 49 reviews
Working Voltage: DC10V-30V(Broad Voltage) Controlling Power: 12V*3A=36W,24V*3A=72W,... Rated Current:3A MAX Current:4A Speed Rate Range:5%-95% PWM Freguency:500Hz Size:74mm*47mm*28mm Weight:67g Potentiometer: B10K;20cm cord length;hole size 8mm Please use the reverse switch when you need reversing function. Attention! Do note connect the positive and negative pole reversely. It may break the controller. You could switch motor pole to make it right rotating direction. Adjust he potentiometer to


Aweking DC10-60V 12V 24V 36V 48V 10A Motor Speed Controller,PWM,Adjustable Driver,Max240W,With Switch potentiometer,10A Fues Overloading Protection,5%-100% Speed Controlling
By Aweking
In Stock
$13.59

mpn: 43237-2, ean: 7523427762410,

4.2 out of 5 stars with 20 reviews
Working Voltage: DC10V-60V(Broad Voltage) Controlling Power: 12V*10A=120W,24V*10A=240W,... Rated Current:10A MAX Current:20A Speed Rate Range:5%-100% PWM Freguency:25kHz Size:84mm*53mm*33mm Weight:120g Potentiometer: B100K;hole size 8mm 10A Fuse (5mm*20mm) protects from reversely power supply connecting and overloading. Please use the reverse switch when you need reversing function. Attention! Do note connect the positive and negative pole reversely. It may break the controller. You could


KB Electronics, 9533, KBMA-24D, 1HP, 1-Phase, 110-120V;200-240V (Input), Nema 1 Enclosure, Variable Frequency Drives
By KB Electronics
In Stock
$168.00

mpn: KBMA-24D,

4.1 out of 5 stars with 7 reviews
KB Electronics, 9533, KBMA-24D, 1HP, 1-Phase, 110-120V;200-240V (Input), Nema 1 Enclosure, Variable Frequency DrivesBrand New Genuine KB Electronics Parts. Factory Authorized KB Electronics Distributor. Tech Support on all products purchased from us..


DZS Elec DC Motor Controller 9-60V PWM Control Switch Motor Speed Regulator DC 12V 24V 36V 48V 60V 10A 600W
By DZS Elec
In Stock
$12.99

mpn: DC9T60V-10A, ean: 0786738640625,

4.6 out of 5 stars with 85 reviews
Specification: Product Name: PWM DC Motor Speed Controller Work Voltage: DC 9-60V Output Current: 0-10A Continuous Power: 600W Control Frequency: 25KHZ Speed Range: 0%-100% Input Reverse Polarity Protection: YES Output Voltage: Load Linear Speed Mode: Potentiometer (linear) Speed Type: Adjusting current Suitable Motor: DC brush Fix Mode: Mounting Lug Mounting Lug Hole Spacing: 104mm Potentionmeter Hole Diameter: 7mm Module Size: 92x52x36mm Connection: Red Thick Line: Positive power supply +


KB Electronics Model Dial-A-Temp (UL) Variable Speed Fan Control, Plug-in Style, Rated 2.5 Amps @ 120 VAC
By KB Electronics
In Stock
$19.58

mpn: H9980, ean: 0024822099806,

4.9 out of 5 stars with 59 reviews
The dial-a-temp is a plug-in style fan speed control specifically designed for controlling built-in fans in stoves and fireplaces. It operates from 115VAC 50/60 Hz with a maximum rating of 250 Watts @ 25ºc. The dial-a-temp contains an on/off line switch.Fan speed control. For use with permanent split capacitor (psc) and split phase motors. Fixed min voltage calibration.


TWTADE/6V 12V 24V Digital Display LED DC Motor Speed Controller PWM Stepless Speed Control Switch HHO Driver - Black CCM5D
By TWTADE
In Stock
$13.99

ean: 0707516167608,

4.3 out of 5 stars with 51 reviews
Before you attempting to wire the controller, make sure power is off. WARNING: DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER. TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR. 1. Connect wires refer to the ''wiring diagram''. 2. Turn on the power, and adjust the potentiometer. 3. The LED display displays the PWM output duty cycle. 4. Push the key, the controller closed, push it again, the controller open.CCM5D DC Motor Speed


KB Electronics, 9493, KBWS-25D, 0-90/0-130/0-180VDC, .75/1.5 HP, Chassis, DC Drive
By KB Electronics
In Stock
$133.00

mpn: KBWS-25D,

4.4 out of 5 stars with 29 reviews
KB Electronics, 9493, KBWS-25D, 0-90/0-130/0-180VDC, .75/1.5 HP, Chassis, DC DriveBrand New Genuine KB Electronics Parts. Factory Authorized KB Electronics Distributor. Tech Support on all products purchased from us..


Walmeck 10-30V 100A 3000W Programable Reversible DC Motor Adjustable Speed Controller Regulator PWM Control
By Walmeck
In Stock
$39.99

mpn: QXM0004036008753GO,

4.3 out of 5 stars with 10 reviews
Applications: 1. various types of general-purpose DC brush motor speed; 2. various types of vehicles motor to adjust speed (automotive cooling fan speed, auto fan speed, auto wiper motor speed, automotive air-conditioning fan speed); 3. the production line belt speed, pipeline exhaust fan speed, treadmill speed, multiple computers in parallel fan speed control, electronic fan speed control; 4. various types of DC lamp dimmer, various types of DC heater thermostat, etc.Specifications: Working


LEEPRA 400W 12000rpm ER11 Brushless Spindle Motor with Driver Speed Controller for Engraving CNC Tool
By LEEPRA
In Stock
$195.00

mpn: LEEPRA@#MOTOR@##@0039, ean: 0754216427389,

4.3 out of 5 stars with 9 reviews
Description: 400W 12000rpm ER11 Brushless Spindle Motor with Driver Speed Controller for Engraving CNC Tool Specification: Brushless motor parameters Color black and silver Working voltage 48V DC Power 400W Speed 12000 r/min Distance 0.45 (N.m) Insulation resistance > 2 ohms Insulation dielectric strength 400V Diameter 55 mm Axis collet length 43mm Diameter of Axis collect holder 16mm Repeat accuracy 0.01-0.03mm ER11 collect 3.175mm Spindle net weight 1.1 KG Brushless DC speed driver controller


Motor Speed Controller, DC10V-55V PWM Brushed DC Motor Speed Controller Adjustable Driver CW CCW Reversible Switch With Digit Display
By walfront
In Stock
$19.99

mpn: 43237-2, ean: 0736691272234,

4.9 out of 5 stars with 93 reviews
Input Voltage: DC10V-55V Output Voltage: Linear with load Max. Current: 60A Continuous Current: 40A Speed Range: 0% to 100% Forward & Reverse: Support Regulation Method: Potentiometer(linear) Regulation Type: Regulating Current Control Frequency: 15KHz Wiring Type: Screw terminal Rotary Knob: 100K(with switch) Suitable for: Brushed DC motor Size: 100 x 76 x 28mm / 3.93 x 2.99 x 1.1'' Package Includes: 1 x Speed ControllerEasy-to-use: Just connected to the item, all is ready. High performance:


Skytech 9800335 MRCK Fireplace Remote Control with Flame Adjustment for Servo Motor Valve Systems
By SkyTech
In Stock
$148.83
$143.20
You Save: 4%

mpn: 9800335, ean: 0080956959577,

4.5 out of 5 stars with 20 reviews
The Skytech systems are developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances.On/Hi Lo/Off function control for operating the Servo Motor Valve System. All battery operated Flame adjustment from off to high with 65,536 security codes. Battery powered receiver box with learn function and On/Remote/Off slider switch. Receiver can be installed on the hearth or under the fireplace behind the control access panel. Includes transmitter, receiver,


Leeson Electric, LM28217, 25HP, 1185RPM, 3PH, 200, 324TC Frame, C-Face Flange, Footless, Open, Traction Elevator Hoist Motor
By Leeson Electric
In Stock
$4,225.76
$3,752.31
You Save: 11%

mpn: LM28217,

4.1 out of 5 stars with 18 reviews
Leeson Electric, LM28217, 25HP, 1185RPM, 3PH, 200, 324TC Frame, C-Face Flange, Footless, Open, Traction Elevator Hoist MotorFast Shipping on Leeson Electric Motors. Authorized Leeson Electric Distributor.


CD60A Motor Starting Capacitor 125VAC 200uF, 125 VAC 200MFD, TMC
By Saihisday
In Stock
$19.99

mpn: Does not apply, ean: 0661066974430,

4.7 out of 5 stars with 22 reviews
▲Specifications: Rated Voltage: 125 V AC Capacitance: 200 uF Tolerance: ±5% MAX TEMP: 70°C▲Dimensions:Dia.: 45 mm, 1.8 inchHeight: 87 mm, 3.4 inch ▲Fast and free shipping from Walton, Kentucky or City of Industry, California.Built to strict quality control standards, 2 years warranty, hassle-free return and money back policy, buy with confidence!If there is a reason you feel like you did not receive 5 star service, please contact us. We want satisfied customers : )√ Condition: Brand


Allen Bradley Powerflex 525 480vac, 10hp, Catalog 25b-d017n104
By Allen-Bradley
In Stock
$775.00

mpn: 25B-D017N104, ean: 0884951885936,

4.8 out of 5 stars with 50 reviews
Powerflex 525, Cat No. 25B-D017N104 •Embedded EtherNet/IP port •Integral RS-485 with Modbus RTU/DSI25B-D017N104. Powerflex 525, 10HP, 480VAC. 25BD017N104.


Die Cast Aluminum Indirect Drive Speed Reducer, 175 lb. Overhung Load
By Dayton
In Stock
$692.37

mpn: NA, ean: 7437839744707,

4.4 out of 5 stars with 43 reviews
Indirect-Drive and 42CZ/48C-Face Parallel-Shaft Speed Reducers with Base All-position mounting using face, base, and top Shipped with heavy-duty oil lubricant in gearcase Spring-loaded lip oil seals on input and output shaftsBase allows high or low positioning of output shaft; face-mounting holes on output side of reducer. Heat-treated steel pinion with helical first stage gearing. Heavy-duty needle and ball bearings with thrust balls. Die-cast aluminum gearcase housing.Specification: Item:



Viewing Page 1 of 8

View more products in Controllers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - wisewarthog.com. All Rights Reserved.