Browse Our Catalog

Liquid Level Sensors - Page 3 - Super Savings! Save up to 32%


Super Savings! Up to 32% off on Liquid Level Sensors at Wise Warthog, Page 3. Top brands include Warrick, Flowline, DFROBOT, Gems Sensors, Gems Sensors and Controls, Milton Industries, Emerson-Fisher LP-Gas Equipment, MPE (Motor Protection Electronics, Inc.), Madison, DerBlue, & Heron. Hurry! Limited time offers. Offers valid only while supplies last.



Warrick 3E3A Cast Iron Liquid Level Sensor with Three Probe, 2" NPT Male
By Warrick
In Stock
$247.00
$241.30
You Save: 2%

mpn: 3E3A,

4.6 out of 5 stars with 99 reviews
Gems Warrick liquid level sensors are available in three probe models. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. It includes food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Series 3E fittings are cast metal, pressure-tight assemblies capable of handling 3 probes. Attachment to vessels is accomplished


Flowline XP89-0 EchoSafe Explosion Proof Ultrasonic Level Transmitter with 32.8' Cable
By Flowline
In Stock
$1,545.00
$1,138.50
You Save: 26%

mpn: XP89-0,

4.7 out of 5 stars with 134 reviews
FM approved for hazardous environments, the explosion proof ultrasonic level transmitter provides continuous level measurement up to 32.8' with a 4-20 milli ampere signal output, and is configured via the integral push button display module. This non-contact liquid level sensor is ideally suited for corrosive, ultrapure, sticky or dirty liquids, and is widely selected for bulk storage, day tank, lift station and process tank level applications located in a classified area. Rugged PVDF


DFROBOT Gravity: Photoelectric Water/Liquid Level Sensor For Arduino Detects The Overflow Of The Solution, The Dry And Horizontal Level, And Can Be Used As A Reminder And Alarm Function
By DFROBOT
In Stock
$14.85

mpn: DF-AK169, ean: 0663274104357,

4.4 out of 5 stars with 52 reviews
INTRODUCTIONThis is a photoelectric water liquid level sensor that is operates using optical principles. The advantages of this photoelectric water liquid level sensor are good sensitivity and no need for mechanical parts - meaning less calibration! The corrosion resistant probe is easily mounted and can handle high temperature and high pressure.   SPECIFICATIONModel: FS-IR02Type: Photoelectric liquid level sensorOperating voltage: 5 VDCOutput current: 12 mAWorking temperature: - 25 ~ 105


Gems Sensors 164520 Polypropylene Float Small Size Type 3 Internal Mounting Single Point Level Switch, 11/16" Diameter
By Gems Sensors
In Stock
$38.00

mpn: 164520, ean: 0013227001293,

4.3 out of 5 stars with 82 reviews
Gems Polypropylene float single point level switch with type 3 internal mounting. Ls-7 series compact side mounts are the solution to many small tanks. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water, oils and chemicals. Switch rating: SPST, 20VA. Lead wire gauge: No. 22 AWG. Mounting attitude: Horizontal. Switch operation: Depending on the mounting position, the float on these switches can rise


Warrick M-BLU-40 SPDT NO Mechanical Tilt Float Switch 40' Cable
By Gems Sensors and Controls
In Stock
$101.00

mpn: M-BLU-40,

4.5 out of 5 stars with 63 reviews
Warrick Model M-BLU-40 Mechanical Tilt Float Switch, 13 Amp, SPST - Normally Open, narrow angle. 40' Cable.Designed for level control and alarm applications a s s e w a g e a n d w a s t e w a t e r .. Series M Floats have Impact resistant ABS Shell and Neoprene Jackets Cable. Contact rating: 13 amp @ 120/240 VAC 1/2 hp.


Flowline DL24-01 Polycarbonate EchoPod Multi Function Ultrasonic Level Transmitter with Fob, 1" NPT, 9.8' Range
By Flowline
In Stock
$485.00
$376.97
You Save: 22%

mpn: DL24-01,

4.8 out of 5 stars with 19 reviews
The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8’ (3m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid,


Milton S-1118-3 5 Micron Bronze Sintered Filter Element
By Milton Industries
In Stock
$19.02
$12.86
You Save: 32%

mpn: S-1118-3, ean: 0030937316455,

4.1 out of 5 stars with 121 reviews
This extra fine bronze sintered 5 micron filter element works with all 1/4'', 3/8'' and 1/2'' filters with 5 or 6 ounce bowls.Porous filter element allows less pressure drop and longer cleaning intervals. Sintered bronze filters are permanent and cleanable. Filters remove harmful oil, water, pipe scale, dirt and rust from compressed air systems. Made in USA.


Emerson-Fisher LP-Gas Equipment, 64-222, 1/2" FNPT Aluminum, High Pressure Regulator with Relief, 35 - 100 PSI, UL Listed
By Emerson-Fisher LP-Gas Equipment
In Stock
$52.83
$51.65
You Save: 2%

mpn: 64-222,

4.7 out of 5 stars with 111 reviews
64 Series - High-pressure (pounds-to-pounds) regulators usually reduce tank pressure to 35-100 psig for use by another regulator. They may be used as high-pressure regulators on distribution systems when used in conjunction with a First-Stage downstream regulator. They are also used for Final-Stage service on high-pressure burners in crop dryers and tobacco curers, as well as other medium sized commercial/industrial applications. The 1/4 in. FNPT side outlet, which is normally plugged, provides


Warrick 3B3B 316 Stainless Steel Two-Piece Threaded Coupling with Single Electrode Probe, 5/8"-24 UNEF
By Warrick
In Stock
$48.00

mpn: 3B3B,

4.3 out of 5 stars with 44 reviews
Gems Warrick liquid level sensors are available in seven probe models. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. Its includes: Food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Series 3B fittings are compact pressure tight assemblies that hold a single electrode probe for use in water and chemicals. These


Gems Sensors 149350 Buna N Float Weighted Single Point Level Switch, 1" Diameter, 3/4" Actuation Level, 20VA, SPST/Normally Close, Dry
By Gems Sensors
In Stock
$117.00
$114.00
You Save: 3%

mpn: 149350,

4.2 out of 5 stars with 22 reviews
Gems series Buna N float weighted single point level switch with 20VA normally close. With a compact-sized float, slosh shield and weighted collar, the LS-750 provides liquid level detection for a wide Variety of applications. Suspend in stand pipes or sumps for leak detection duty, or drop into wells for ground-water monitoring. Supplied with 25 feet of waterproof cable. Stem and mounting material: Brass. Float material: Buna N. Other wetted material: Nylon, PVC, Beryllium Copper. Minimum


Gems Sensors 114166 Single Channel Zener Barrier, 33.9 ohms Resistance, +30 VDC Voltage, 250 mA Current
By Gems Sensors
In Stock
$402.14

mpn: 114166,

4.5 out of 5 stars with 49 reviews
Gems single channel zener barrier. The exceptionally compact design of Gems 65800 series units saves space and simplifies installation; especially in multiples on a common mounting plate. They provide great economy as well since no explosion-proof enclosures are needed for sensor wiring. Encapsulated construction is impervious to dust and moisture. Singlescrew mounting is standard, but units can be supplied with an optional clip for rail mounting. The single through-mounting screw also provides


MPE LPC420 Level Probe Converter - 4-20mA Output from MPE Level Probe
By MPE (Motor Protection Electronics, Inc.)
In Stock
$426.00

mpn: LPC420,

4.9 out of 5 stars with 35 reviews
Converts Level Probe Conductivity to 4-20mA OutputThe Level Probe Converter senses liquid level and provides a 4-20mA analog output for use by a pump controller or PLC to control liquid level.. All setup is easily done using the four DIP switches on the unit.. When the electrodes are slowly covered one at a time, the Analog Output Delay is used to provide a smooth transition as the level goes from electrode to electrode..


Flowline LM52-1400 PVC Reducer Bushing, 2" x 1" NPT Thread
By Flowline
In Stock
$13.35
$10.28
You Save: 23%

mpn: LM52-1400,

4.6 out of 5 stars with 86 reviews
LM52-1400PVC material. Reducer bushing. 2'' by 1'' NPT thread. Scheduled 40. Pack of 1.


Gems Sensors 174200 LS-1700TFE Series Level Switch
By Gems Sensors
In Stock
$266.00
$238.81
You Save: 10%

mpn: 174200,

4.0 out of 5 stars with 45 reviews
A medium-size solution for ultra-pure liquid level sensing. Made of corrosion resistant PTFE for low particle generation.Minimum Liquid: 0.86. Stem Material: Teflon. Float Material: Teflon. Mounting Size: 1/8'' NPT Male. Mounting: Vertical.


Madison M5920 Stainless Steel Side Mounted Liquid Level Float Switch, 30 VA SPST, 1/2" NPT Male, 300 psig Pressure
By Madison
In Stock
$149.05
$142.00
You Save: 5%

mpn: M5920,

4.0 out of 5 stars with 81 reviews
Side-mounted liquid level switch has a stainless steel stem and a stainless steel float. Stainless steel stems and floats are well suited for corrosive environments as well as food processing, medical, heating, and cooling applications. The M5920 has American Bureau of Shipbuilding (ABS) approval, among others. For high-temperature (to 250 degree C), high-pressure (to 300 PSIG) and corrosive conditions. Single Pole, Single Throw. Maximum temperature: 200 degree C. Fittings: 1/2'' NPT x 1/2''


Flowline LU27-01 EchoSonic II Ultrasonic Level Transmitter with 9.8' Cable and Fob, 1" NPT
By Flowline
In Stock
$580.00
$418.85
You Save: 28%

mpn: LU27-01,

4.2 out of 5 stars with 113 reviews
Offered in a type 6P enclosure with cable interface, the general purpose ultrasonic level transmitter provides continuous level measurement up to 32.8' with a 4-20 milliampere signal output, and is configured via our free Webcal software. This non-contact liquid level sensor is ideally suited for corrosive, ultrapure, sticky or dirty liquids, and is broadly selected for bulk storage, day tank, lift station and process tank level applications. Submersible type 6P enclosure is ideal for sump and


Madison M5600 316 Stainless Steel Full Size Liquid Level Switch with Stem, 60 VA SPST, 1/4 NPT, 200 psig Pressure
By Madison
In Stock
$63.74
$52.69
You Save: 17%

mpn: M5600,

4.3 out of 5 stars with 91 reviews
Liquid level switch has a stainless steel stem and a stainless steel float. Stainless steel stems and floats are well suited for corrosive environments as well as food processing, medical, heating, and cooling applications. For high-temperature (to 250 degree C), high-pressure (to 300 PSIG) and corrosive conditions. 22 gauze Teflon 24'' lead wires. 0.55 float SG. Approvals: ABS, CE, CSA, Explosion Proof, NSF International and UL.Liquid level switch has a stainless steel stem and a stainless


DerBlue Side Mounted Aquarium Pool Liquid Water Level Sensor Stainless Steel Float Switch (Style A)
By DerBlue
In Stock
$11.99

mpn: DP9829302, ean: 8737302644114,

4.7 out of 5 stars with 149 reviews
The description of products:The Stainless Steel float switch of side mount duckbilled is a frequently opened, often closed, switching contact and with the overall brake, it's installed from the outside and doesn't need to be sealed.The Main parameters of products:Installation: It is installed horizontally drilling at the bottom or at the top.The texture of guide rod: Stainless SteelThe texture of floater: Stainless SteelPressure of work: 15 BarTemperature of work: -10~80℃Accurate error: ±2mm


Madison M8700-C Polypropylene HVAC Series Condensate Level Float Switch, 30 VA SPST, 1/2 x 3/4 NPT Male, 100 psig Pressure
By Madison
In Stock
$16.35
$16.19

mpn: M8700-C, ean: 0094703781830,

4.7 out of 5 stars with 106 reviews
HVAC Series condensate level float switch. Using highly reliable magnetic float switch technology, units capable of reliable operation at temperatures as high as 300 degree C (572 degree F) and pressures of up to 1500 PSI (103 BAR) have been designed. Such harsh-environment switches can incorporate Madison's temperature sensors, offering the combination of both point level indication and temperature measurement within the same level switch design. This can eliminate costs for multiple mountings


Heron 1148 LdDx75ft Little Dipper-Water Level Meter, 75'
By Heron
In Stock
$452.00

mpn: 1148 LdDx75ft,

4.3 out of 5 stars with 88 reviews
Heron 1148 LdDx75ft Little Dipper-Water Level Meter, 75'Easy to read and accurate (to ASME standard) heavy duty polyethylene jacketed tape with stainless steel conductors. Modular electronic panel with battery drawer, audible signal and light, sensitivity control and circuit test button. Durable, environmentally protected circuitry extends lifespan. A tape length of 75 feet (22 meters). A Carrying bag is included.



Viewing Page 3 of 8

View more products in Sensors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - wisewarthog.com. All Rights Reserved.